Like everything, best golf irons also have specific lifespans. With time, they wear out gradually. Buying a new golf set is not possible all the time. In this circumstance, reshafting can be the best solution.
Again, you need to reshaft irons if they are not suitable for your playing style or don’t have enough flex.
But How much does it cost to reshaft irons? Is it worthy to reshaft irons?
In this article, we are trying to provide ideas about iron reshafting cost as well as discuss the reasons, advantages of it.
Have a look-
How much does it cost to reshaft irons?
Either the iron shaft is damaged or broken, or needs to change for swing style, so iron reshafting is more reasonable than buying a new one. By several market research, you need to spend $15 to $25 to install an iron shaft. After re-shafting, you need to set up a new grip. That will cost around $3 to $12.
So the average material cost for reshafting each iron will be around $18 to $37. Adding labor or servicing cost, it will be between $20 to $100. The cost will increase according to the number of iron clubs.
In addition, the total expense depends totally on your choice, quantity, the material either steel or graphite, labor charge, and other materials cost. Like graphite shafts cost more than steel ones.
Reasons for reshafting irons
Reshafting iron is a fundamental step to keep your golf iron clubs up to date. Not only for changing the broken shaft but there are some other reasons also such as-
- After buying a new golf set, if they do not cope up with your swing style
- Iron clubs perform better than old ones after reshaft
- You need to adjust the flex of iron clubs
- To regrip the shaft of iron clubs
- When you want to change graphite shaft to steel or vice versa
- To increase your comfort of playing as well as overall performance
- When you do not afford to buy an expensive golf club
How to reshaft iron clubs?
You can reshaft iron clubs from servicing stores. But the process isn’t very complex. If you want, you can reshaft in your home with less cost.
You need some equipment to reshaft iron clubs properly.
Essential equipment
- Dremel tool with the cut-off wheel
- q-tips
- acetone
- Vice
- 2-part epoxy
- shaft puller
- new ferrule
- leather gloves
- electric head gun
- sandpaper
Iron reshaft process
Now we are going to guide you step by step to reshaft your irons clubs –
-
Step 1
At first, the replacing shaft should be matched with the old shaft. Choose the right sized shaft, usually, most shafts are 335”
-
Step 2
The second step is the removing part. The shaft may either be steel or graphite. The detaching process is quite different for them.
-
For steel shaft
First, take the leather gloves. Then heat the gun for 20 to 25 seconds. Then place the shaft holder and tighten the vice.
You can pull the lead off by twisting it. The heat must go through the face, hosel, and sole unlit it loses.
-
For graphite shaft
The detaching process is kind of the same initially. You have to use a shaft puller and repeat the process. To remove the graphite shaft, use a heat gun and put the shaft at the extractor. Then turn on the tractor with a box wrench. The shaft will be loose at this moment.
-
Step 3
After removing the shaft, clean the inside of the hosel. This time you should use sandpapers to rub any stubborn stain or rust. Then wash and dry them out.
-
Step 4
Drivers vary to 1.25 inches, mostly 1 inch is used. You need to know which driver is needed. To insert into the shaft, you need to remove the paint on the tip. Use another sandpaper to make it even.
-
Step 5
After cleaning the tip, mix the epoxy. Keep it for up to 24 hours to set well.
-
Step 6
Apply glue by rotating the shaft. Ensure glue is properly placed all over the tip. Make sure the amount is not much to make it messy.
-
Step 7
Now is the final step. Reshaft your preferred shaft by aligning properly. Either graphite or steel, the alining process is the same for both of them. Then add the grip. Keep them for the next 24 hours to set perfectly.
Now your iron club is ready with a new shaft.
Benefits of using a steel shaft
- Steel shafts make vibration that is enjoyable by many golf players
- It helps to take control of swing during playing
- Steels are more stable and durable
- The steel shaft is more beneficial and useful for fast swingers
- The steel shaft cost is pocket friendly
Benefits of using Graphite shaft
- Graphite shafts are easy to handle and lightweight
- Swing distance will increase yards for graphite shaft
- The graphite shaft is popular for increasing swing speed
- It hit your leg or body, it will be less painful
- It’s handy for beginner, aged players
Advantages of reshafting irons
Reshafting is not just repairing but also has several advantages. That will play a crucial role in the overall performance of a golf player like-
Improvement in swing
Perfect swing depends on the shaft transmission by the player’s hands towards the clubhead. So that a wrong and imperfect shaft may cause accuracy and speed degradation.
If the shaft is damaged or the new iron shaft is not working for your swing, immediately change it. Reshaft iron will enhance your confidence as well as improve performance.
Increase speed and distance
A right shaft is essential for different speed ratings. A player needs the right and proper grip to help him to hit at various distances.
Also, the speed is dependent on the flex. Hence, you will get desired speed and distance by reshafting iron clubs.
Save you money
Golf clubs are a little bit expensive. It’s not possible to buy a total set just for 1 or 2 iron shafts that got damaged or keep them up to date. Rather a better option is to reshaft irons.
Thus, the reshaft process is much easier and more cost-effective than buying a new one. The approximate cost is already mentioned in the above section.
Final words
Reshafting irons have a direct relation with the overall performance of golf players. The process is simple as well as reasonable. You can make a brand new golf club set by reshafting them as per your preferences.
After all, reshaft iron clubs are worth your money and effective at the same time.